The Canned Pump is a centrifugal pump, close coupled to a Canned Motor in such a way that there is no dynamic shaft seal, no couplings and no ball bearings.

Dynamic Canned motor’s are provided with Reverse circulation line so that the pumped liquid do not vapourize at any of the bearing in the pumps.

The wide range of models available allows top quality standardization. HIgh efficiency is combined with superb handling and ease of installation is attributed to the experience of the Dynamic Team and close collaboration with large number of customers.

Dynamic Canned Motor Pump’s are designed for high temperature fluids, process fluids is re-circulated within the motor section via an auxiliary impeller.

Dynamic Canned Motor for slurry application is so designed that the pumped liquid is obstructed from entering into the motor chamber by a clean compatible liquid, which is flushed from the rear inlet port through a back flushing line.

Dynamic make multistage Canned Motor Pump is and improved with dramatically increased pump efficiency, with an accurately balancing the axial thrust over the entire range of flow by a balancing disk seat.

Dynamic Vertical Canned Motor Pumps are preferred for all liquids containing gas or vapours. The gas or vapour settled in the pump must find there way out even when the pump is stopped.

In the Dynamic Canned Motor Pump a gas seal is provided between pump and motor, the gas keeps the pumped liquid containing slurry from reaching the separation seal.

Dynamic Regenerative (Turbine) Canned Motor Pumps is designed for highly volatile and difficult to seal fluid where absolutely leak free performance is required.

This provides the greatest possible flexibility, developing & specific maximum discharge pressure under any operating condition with delivery controlled by either speed variation or throttling.

developing & specific maximum discharge pressure under any operating condition with delivery controlled by either speed variation or throttling.